Wind RC
WRC VIP2-03

2m Viper Turbine Jet with Retracts, Lights and Servos, Orange/Black

2m Viper Turbine Jet with Retracts, Lights and Servos, Orange/Black

Factory Order
$3,195.00
$275.00 Flat Rate Truck Freight to Commercial Addresses (48 States)
Add $100 for Residential Delivery - Inspection Required: Click Here

2m Viper Turbine Jet, Orange/Black, from Wind RC

Includes: Airframe w/Electric Landing Gear, Thrust Tube, (10) HV Servos with Extensions, Navigation Lights & Hardware (Most Items Installed at Factory)


Residential Addresses Require An Additional $100 Delivery Charge
Click Here for Delivery Inspection Requirements


  • Electric retractable landing gear set
  • Landing gear controller included
  • Gear doors installed at factory
  • Navigation light set pre-installed at factory
  • Light set controller included
  • Scaled cockpit
  • Thrust tube installed at factory
  • Includes composite fuel cell
  • UAT with fuel line included in kit
  • Servo wires and extensions pre-installed
  • Includes 10 high voltage servos (not installed)
  • All surfaces have pre-installed linkages with metal arms
  • Complete hardware included with kit

  • Wingspan: 86.61" (2,200mm)
  • Length: 80.71" (2,050mm)
  • Dry Weight: 18 lbs (8.2kg)
  • Turbine: 90-130N
  • Servos (Included): (7) GDW596, (2) GDW390, (1) GDW290
  • Wingspan: 86.61" (2,200mm)
  • Length: 80.71" (2,050mm)
  • Dry Weight: 18 lbs (8.2kg)
  • Turbine: 90-130N
  • Servos (Included): (7) GDW596, (2) GDW390, (1) GDW290

Servos Specs:

GDW DS 596 MG High Voltage Servo

  • Aluminum Case with Steel Gears
  • Dimensions: 15 x 36 x 31.5mm
  • Weight: 48g (1.7 oz)
  • Voltage: 4.8V-8.4V
  • Speed and torque:
    • 11Kg.cm/0.12sec/60°@6.0V
    • 13.5Kg.cm/0.10sec/60°@7.4V
    • 15Kg.cm/0.085sec/60°@8.4V
  • Motor: Coreless 17x15mm
  • Spline: 25 tooth

GDW DS 390 MG High Voltage Servo

  • Aluminum Case with Steel Gears
  • Dimensions: 15 x 36 x 30mm
  • Weight: 40g (1.4 oz)
  • Voltage: 4.8V-8.4V
  • Speed and torque:
    • 6.5Kg.cm/0.12sec/60°@6.0V
    • 8Kg.cm/0.10sec/60°@7.4V
    • 9Kg.cm/0.09sec/60°@8.4V
  • Motor: Coreless 12x15mm
  • Spline: 25 tooth

GDW DS 290 MG High Voltage Servo

  • Aluminum Case with Steel Gears
  • Dimensions: 22.9 x 12 x 27.4mm
  • Weight: 20g (2.8 oz)
  • Voltage: 4.8V-8.4V
  • Speed and torque:
    • 5.6Kg.cm/0.052sec/60°@8.4V
    • 4.8Kg.cm/0.065sec/60°@7.4V
    • 4.1Kg.cm/0.072sec/60°@6.0V
    • 3.6Kg.cm/0.084sec/60°@4.8V
  • Motor: Coreless 12x15mm
  • Spline: 25 tooth