3.2m Boeing T7A Turbine Jet, Prototype, from Wind RC

Includes: Airframe w/Electric Landing Gear, Jet Pipe, (10) HV Servos with Extensions, Navigation Lights & Hardware (Most Items Installed at Factory)

Residential Addresses Require An Additional $100 Delivery Charge
Click Here for Delivery Inspection Requirements

• Electric retractable landing gear set with brakes
• Landing gear sequencer and brake controller included
• Gear doors installed at factory
• Navigation light set pre-installed at factory
• Light set controller included
• Detailed scale cockpit
• Jet pipe installed at factory
• Includes 3L (101oz) composite fuel cell
• 150 mL UAT with fuel line included in kit
• Servo wires and extensions pre-installed
• Includes 10 high voltage servos (not installed)
• All surfaces have pre-installed linkages with metal arms
• Complete hardware included with kit

• Wingspan: 83.6" (2,124mm)
• Length: 126.5" (3,215mm)
• Dry Weight: 42.9-46.2 lbs (19.5-21kg)
• Turbine: 35-57 lbs thrust (16-26kg)
• Fuel Tank: 3L (101 oz) composite
• UAT (included): 150mL
• Servos (Included): (9) GDW830, (1) GDW596

• Wingspan: 83.6" (2,124mm)
• Length: 126.5" (3,215mm)
• Dry Weight: 42.9-46.2 lbs (19.5-21kg)
• Turbine: 35-57 lbs thrust (16-26kg)
• Fuel Tank: 3L (101 oz) composite
• UAT (included): 150mL
• Servos (Included): (9) GDW830, (1) GDW596

Servos Specs:

GDW DS 830 MG High Voltage Servo

• Aluminum Case with Steel Gears
• Dimensions: 40.5 x 21 x 36.9mm
• Weight: 77g (0.70 oz)
• Voltage: 6V-8.4V
• Speed and torque:
  • 27Kg.cm/0.14sec/60°@6.0V
  • 32Kg.cm/0.12sec/60°@7.4V
  • 35Kg.cm/0.10sec/60°@8.4V
• Motor: Coreless 17x18mm
• Spline: 25 tooth

GDW DS 596 MG High Voltage Servo

• Aluminum Case with Steel Gears
• Dimensions: 15 x 36 x 31.5mm
• Weight: 48g (1.7 oz)
• Voltage: 4.8V-8.4V
• Speed and torque:
  • 11Kg.cm/0.12sec/60°@6.0V
  • 13.5Kg.cm/0.10sec/60°@7.4V
  • 15Kg.cm/0.085sec/60°@8.4V
• Motor: Coreless 17x15mm
• Spline: 25 tooth