2m Boeing T7A Turbine Jet, Prototype, from Wind RC

Includes: Airframe w/Electric Landing Gear, Jet Pipe, (10) HV Servos with Extensions, Navigation Lights & Hardware (Most Items Installed at Factory)

Residential Addresses Require An Additional $100 Delivery Charge
Click Here for Delivery Inspection Requirements

• Electric retractable landing gear set with brakes
• Landing gear and brake controller included
• Gear doors installed at factory
• Navigation light set pre-installed at factory
• Light set controller included
• Detailed scale cockpit
• Jet pipe installed at factory
• Includes composite fuel cell
• UAT with fuel line included in kit
• Servo wires and extensions pre-installed
• Includes 10 high voltage servos (not installed)
• All surfaces have pre-installed linkages with metal arms
• Complete hardware included with kit

• Wingspan: 52.8" (1,340mm)
• Length: 80.7" (2,050mm)
• Dry Weight: 17.64 lbs (8kg)
• Turbine: 17-26 lbs thrust (8-12kg)
• Servos (Included): (6) GDW830, (2) GDW596, (1) GDW290, (1) GDW390

• Wingspan: 52.8" (1,340mm)
• Length: 80.7" (2,050mm)
• Dry Weight: 17.64 lbs (8kg)
• Turbine: 17-26 lbs thrust (8-12kg)
• Servos (Included): (6) GDW830, (2) GDW596, (1) GDW290, (1) GDW390

Servos Specs:

GDW DS 830 MG High Voltage Servo

• Aluminum Case with Steel Gears
• Dimensions: 40.5 x 21 x 36.9mm
• Weight: 77g (0.70 oz)
• Voltage: 6V-8.4V
• Speed and torque:
  • 27Kg.cm/0.14sec/60°@6.0V
  • 32Kg.cm/0.12sec/60°@7.4V
  • 35Kg.cm/0.10sec/60°@8.4V
• Motor: Coreless 17x18mm
• Spline: 25 tooth

GDW DS 596 MG High Voltage Servo

• Aluminum Case with Steel Gears
• Dimensions: 15 x 36 x 31.5mm
• Weight: 48g (1.7 oz)
• Voltage: 4.8V-8.4V
• Speed and torque:
  • 11Kg.cm/0.12sec/60°@6.0V
  • 13.5Kg.cm/0.10sec/60°@7.4V
  • 15Kg.cm/0.085sec/60°@8.4V
• Motor: Coreless 17x15mm
• Spline: 25 tooth

GDW DS 390 MG High Voltage Servo

• Aluminum Case with Steel Gears
• Dimensions: 15 x 36 x 30mm
• Weight: 40g (1.4 oz)
• Voltage: 4.8V-8.4V
• Speed and torque:
  • 6.5Kg.cm/0.12sec/60°@6.0V
  • 8Kg.cm/0.10sec/60°@7.4V
  • 9Kg.cm/0.09sec/60°@8.4V
• Motor: Coreless 12x15mm
• Spline: 25 tooth

GDW DS 290 MG High Voltage Servo

• Aluminum Case with Steel Gears
• Dimensions: 22.9 x 12 x 27.4mm
• Weight: 20g (2.8 oz)
• Voltage: 4.8V-8.4V
• Speed and torque:
  • 5.6Kg.cm/0.052sec/60°@8.4V
  • 4.8Kg.cm/0.065sec/60°@7.4V
  • 4.1Kg.cm/0.072sec/60°@6.0V
  • 3.6Kg.cm/0.084sec/60°@4.8V
• Motor: Coreless 12x15mm
• Spline: 25 tooth