RC Plane Stands
RCPS 100300

Ultimate II Floor Model RC Airplane Stand, for 100cc & Larger Models

Ultimate II Floor Model RC Airplane Stand, for 100cc & Larger Models

In Stock - Ships Factory Direct
$775.00
Item Qualifies for Free Ground Freight (48 States) on Orders Over $75

RC Plane Stands Ultimate II Floor Model, for 100cc or Larger Models

Download the Assembly Manual Here

Top-quality, made from Baltic Birch plywood and quality hardware. Works well for larger (100 cc) +plus size planes, but can also be used for your smaller planes too. Fully adjustable angles and heights, the adjustable arms and slings conform to different body widths and shapes. This is my Mid-Size stand made with mostly 3/4" Baltic Birch. The top of the arms has Velcro with a Velcro one-wrap strap over them so you can adjust them as you move the arms in and out for a snug fit to your fuselage.

This unit is sanded and unfinished, This allows you to choose how to finish your stand or you can just leave it as bare wood.

  • Sliding support carriage that extends out for larger aircraft.
  • The length of the fuselage supports can be from 15" up to 74" when fully extended. Of course the fuselage can be much longer by hanging over the ends.
  • Holds up to 150lb aircraft easily.
  • Comes with a set of 4 Lever Handles and 4 - 1 1/4" fender washers so you can really crank the main rails tight to avoid slipping.
  • Unit weighs 38lbs. with the 5" wheels.
  • Removable 30" wide legs for easy transport. Held on with 5 star studded knobs.
  • Comes with 5" Locking, Rubber Wheels for stability in rough terrain. Unfinished - Add your own finish, purchase a finish, or leave it bare.
  • Length: 44"
  • Width: 30"
  • Height: 12" (collapsed) up to ~36" high when extended
  • Arms adjust for a 2" to 20" wide fuselages. (with the arms straight up 90 degrees)