Aeroshell Diesel Ultra Engine Oil, per Liter

Ships from the East Coast

Synthetic lubricating oil for aircraft diesel engines

AeroShell Oil Diesel Ultra is a fully synthetic, multigrade engine oil designed for use in the new generation of compression ignition (Diesel) Aviation Piston Engines.

The formulation has been selected to be suitable in piston engines fueled by Jet A or Jet A-1 and is designed for use in the latest highly rated turbocharged diesel engines under all operating conditions.

It also contains unique Shell approved additives to provide superior piston cleanliness resulting in a clean, efficient and reliable engine. These additives also include a powerful surface acting additive, which bonds to the surface of highly loaded engine parts, protecting the engine from scuffing damage.

The oil has been developed to provide excellent component wear protection and engine cleanliness, based on flight experience with diesel aero engines in the field over recent years and substantial engine and component endurance tests with all major Diesel aero engine manufacturers.

AeroShell Oil Diesel Ultra key performance features include the ability to sustain high bearing loads, neutralization of acid build up from the Sulphur present in the fuel and high dispersancy to allow for the relatively high particle loading produced when burning Jet fuel.

AeroShell Oil Diesel Ultra has been developed to be suitable for use in engines burning Jet fuel and its performance has been optimized to cope with the demands of this unique type of engine/fuel combination.

AeroShell Oil Diesel Ultra MUST NOT be used in spark ignition or Avgas powered aircraft engines.

AeroShell Oil Diesel Ultra is approved for use in the following engines. Whilst this is correct at the time of writing, testing is ongoing to extend this approval listing as new engines are produced.

• Thielert/Centurion Engines: 1.7 & 2.0 Centurion (Other models yet to be produced)
• SMA: SR305_230E
• Austro Engine: AE300
• ACEA: Meets the requirements of A3/B4
• API Meets the requirements of SL/CF
• SAE: Viscosity grade 5W-30