Phillips 66 Victory 100AW Single-grade Engine Oil, Qt

Ships from the East Coast Locations

ASHLESS DISPERSANT, SINGLE-GRADE ENGINE OIL WITH ANTIWEAR ADDITIVE FOR AIRCRAFT PISTON ENGINES

Phillips 66® Victory Aviation Oil 100AW is an ashless dispersant, single-grade engine oil pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It is recommended for use in opposed piston and radial piston aircraft engines where cam lifter wear is a concern.

• Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
• Pre-blended with Lycoming-approved antiwear additive
• High film strength for protection against wear and piston scuffing
• High viscosity index and low pour point for use over a wide temperature range
• Protects against rust and corrosion
• Formulated with the same high-quality base oils as used in Phillips 66 X/C® Aviation Oil

Applications: Opposed piston aircraft engines, especially where cam lifter wear is a concern

Victory Aviation Oil 100AW meets the requirements of:

• Avco Lycoming Material Specification No. 301G
• Pratt & Whitney Service Bulletin No. 1183 Rev. U
• SAE Standard J1899
• Teledyne Continental Material Specification MHS-24B
• U.S. Military Specification MIL-L-22851D (obsolete) for additive treatment

• SAE Grade: 50
• Gravity, °API: 27
• Specific Gravity @ 60°F: 0.893
• Density, lbs/gal @ 60°F: 7.44
• Color, ASTM D1500: 3
• Flash Point (COC), °C (°F): 255 (491)
• Pour Point, °C (°F): -27 (-17)
• Viscosity, Kinematic:
• cSt @ 40°C: 189
• cSt @ 100°C: 19.5
• Viscosity Index: 118
• Acid Number, ASTM D664, mg KOH/g: 0.04
• Ash Content, SAE J1787, wt %: 0.04
• Copper Corrosion, ASTM D130: Pass
• Foam Test, ASTM D892: Pass