MKS Servo with Full Aluminum Case and Titanium Gears

The MKS HV High Voltage Servo series is designed to operate at high voltage and low current, delivering higher torque per unit weight. A control data rate of 333Hz makes the MKS HV servo an exceptionally agile, ultra-fast responding product with precise control. Titanium gears, dual ball bearing output shaft, and strong overload protection delivers low noise, durability and long life.

• Dead Band: 0.0008 ms (Default)
• Control System: +Pulse Width Control
• Working Frequency: 1520μs / 333hz
• (RX) Required Pulse: 3.5 ~8.4 Volt Peak to Peak Square Wave
• Operating Voltage: 6.0 ~8.4 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (6V): 0.13 sec/60° degrees at no load
• Operating Speed (7.4V): 0.11 sec/60° degrees at no load
• Operating Speed (8.4V): 0.10 sec/60° degrees at no load
• Stall Torque (6V): 409 oz/in (29.5 kg/cm)
• Stall Torque (7.4V): 506 oz/in (36.5 kg/cm)
• Stall Torque (8.4V): 561 oz/in (40.4 kg/cm)
• Motor Type: Coreless Motor
• Potentiometer Drive: Indirect Drive
• Driver Type: FET
• Bearing Type: Dual Ball Bearings
• Gear Type: Titanium Gears
• Programmable: NO
• Connector Wire Length: 15.0 cm (5.9 in)
• Dimensions: 40X20X40 mm (1.57x0.97x1.57 in)
• Weight: 75.45 g