HV1250 Digital Super-Speed High Voltage Servo, with Titanium Gears, by MKS

The HV1250 titanium gear servo is reccomended for use on any high speed application. The perfect giant scale aircraft throttle servo with a high voltage system setup.

• Operating Voltage: 4.8~8.4 V DC Volts
• Operating Speed (7.4V): 0.061 sec/60° degrees at no load
• Operating Speed (8.4V): 0.054 sec/60° dagrees at no load
• Stall Torque (7.4V): 10.4 kg-cm (144 oz/in)
• Stall Torque (8.4V): 11 kg-cm (152.7 oz/in)
• Motor Type: Coreless Motor
• Bearing Type: Dual Ball Bearings
• Gear Type: Titanium Gears
• Dimensions: 40X20X37 mm
• Weight: 57.70 g (2.03oz)

• Dead Band: 0.0008ms (Default)
• Control System: +Pulse Width Control
• Working Frequence: 1520μs / 333hz
• (RX) Required Pulse: 3.0~8.4 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8~8.4 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (7.4V): 0.061 sec/60° degrees at no load
• Operating Speed (8.4V): 0.054 sec/60° dagrees at no load
• Stall Torque (7.4V): 10.4 kg-cm (144 oz/in)
• Stall Torque (8.4V): 11 kg-cm (152.7 oz/in)
• Motor Type: Coreless Motor
• Potentiometer Drive: Direct Drive
• Driver Type: FET
• Bearing Type: Dual Ball Bearings
• Gear Type: Titanium Gears
• Programmable: NO
• Connector Wire Length: 15.0 cm (5.9 in)
• Dimensions: 40X20X37 mm
• Weight: 57.70 g (2.03oz)