HBL950 Digital Brushless High-Speed High Voltage Servo, with Titanium Gears, by MKS

This is the MKS HBL950 Brushless, Titanium Gear, High Torque, High Voltage Digital Servo.

• Dead Band: 0.0008ms (Default)
• Control System: +Pulse Width Control
• Working Frequency: 1520μs / 333hz
• (RX) Required Pulse: 3.5 ~ 7.2 Volt Peak to Peak Square Wave
• Operating Voltage: 4.0 ~ 7.2 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (6V): 0.12 sec/60° degrees at no load
• Operating Speed (8.4V): 0.09 sec/60° degrees at no load
• Stall Torque (6V): 184.70 oz/in (13.3 kg.cm)
• Stall Torque (8.4V): 252.47 oz/in (18.18 kg.cm)
• Motor Type: Brushless Motor
• Potentiometer Drive: Indirect Drive
• Bearing Type: Dual Ball Bearings
• Gear Type: Titanium Gears
• Connector Wire Length: 24.0 cm (9.4 in)
• Dimensions: 40 x 20 x 40 mm ( 1.57x0.79x1.50 in)
• Weight: 70.29 g (2.48 oz)

• Dead Band: 0.0008ms (Default)
• Control System: +Pulse Width Control
• Working Frequency: 1520μs / 333hz
• (RX) Required Pulse: 3.5 ~ 7.2 Volt Peak to Peak Square Wave
• Operating Voltage: 4.0 ~ 7.2 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (6V): 0.12 sec/60° degrees at no load
• Operating Speed (8.4V): 0.09 sec/60° degrees at no load
• Stall Torque (6V): 184.70 oz/in (13.3 kg.cm)
• Stall Torque (8.4V): 252.47 oz/in (18.18 kg.cm)
• Motor Type: Brushless Motor
• Potentiometer Drive: Indirect Drive
• Bearing Type: Dual Ball Bearings
• Gear Type: Titanium Gears
• Connector Wire Length: 24.0 cm (9.4 in)
• Dimensions: 40 x 20 x 40 mm ( 1.57x0.79x1.50 in)
• Weight: 70.29 g (2.48 oz)