DS1220 Digital High-Torque Servo, with Titanium Gears, by MKS

• Dead Band: 0.0008ms (Default)
• Control System: +Pulse Width Control
• Working Frequence: 1520μs / 333hz
• (RX) Required Pulse: 3.0~6.6 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8~6.6 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (6V): 0.159 sec/60° degrees at no load
• Operating Speed (6.6V): 0.14 sec/60° dagrees at no load
• Stall Torque (6V): 24.9 kg-cm (346 oz/in)
• Stall Torque (6.6V): 30.4 kg-cm (422 oz/in)
• Motor Type: Coreless Motor
• Potentiometer Drive: Direct Drive
• Driver Type: FET
• Bearing Type: Dual Ball Bearings
• Gear Type: Titanium Gears
• Programmable: NO
• Connector Wire Length: 15.0 cm (5.9 in)
• Dimensions: 40X20X37 mm
• Weight: 57.70 g ( 2.03oz)

• Dead Band: 0.0008ms (Default)
• Control System: +Pulse Width Control
• Working Frequence: 1520μs / 333hz
• (RX) Required Pulse: 3.0~6.6 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8~6.6 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (6V): 0.159 sec/60° degrees at no load
• Operating Speed (6.6V): 0.14 sec/60° dagrees at no load
• Stall Torque (6V): 24.9 kg-cm (346 oz/in)
• Stall Torque (6.6V): 30.4 kg-cm (422 oz/in)
• Motor Type: Coreless Motor
• Potentiometer Drive: Direct Drive
• Driver Type: FET
• Bearing Type: Dual Ball Bearings
• Gear Type: Titanium Gears
• Programmable: NO
• Connector Wire Length: 15.0 cm (5.9 in)
• Dimensions: 40X20X37 mm
• Weight: 57.70 g ( 2.03oz)