37% Sukhoi 29 Race 3R Green/Silver Scheme ARF Gas Airplane, by Krill Models

Residential Addresses Require An Additional $100 Charge - Delivery Inspection Requirements

• New and very practical servo installation for ailerons. No more ugly screws to look at and no more open bays.
• New hinge, preventing ailerons delaminating.
• New internal structure in the wings, 2 main spars! Wings are very solid and light.
• Aluminum wing tube 45/1mm.
• Carbon fiber motor dome.
• Canopy and cowl already installed!
• Predrilled aluminum landing gear.
• Fuel and smoke tank floor already installed.
• Slots for control horns are cut.

Chief Orders will Include Optional Clear Canopy

Kit includes:

• Composite parts: fuselage, canopy frame with silver canopy, cowl, rudder, elevator, wings, wheel pants.
• Accessories: aluminum wing tube 45/1mm, stab tube 22/1.5mm, aluminum landing gear, all necessary bolts and nuts, wheel axles and CNC cut control horns.

Components description:

• Fuselage - vacuumed fiberglass sandwich with all bulkheads in place, including tray for 4 rudder servos. Tank floor installed and tied into side longerons, which can be used to attach all necessary equipment and radio components.
• Wing - vacuumed fiberglass sandwich. Aluminum wing tube 45/1mm, each wing panel has 3 servo bays (JR 8711 is recommended).
• Elevator - vacuumed fiberglass sandwich. Can be taken apart, hinge brass tubing is removable. Each half requires 2 servos (JR 8711 is recommended ). Two stab tubes, 22/1 and 10/1mm.
• Rudder - vacuumed fiberglass sandwich, also removable with brass hinge tubing from the bottom. Should make it easier for transport. Servos recommended should have combined torque at least 60kg (133 lb.)
• Canopy/canopy frame - Aluminum/titanium - comes with the kit. Canopy frame is fitted and attached to fuselage from our factory, using M4 bolts and dowels.
• Cowl - made out of fiberglass, installed from our factory, using 8 M4 bolts. Engines from 150 to 170 will fit without any problems.
• Landing gear and wheel pants - aluminum, mounting and axle holes are predrilled. Wheel pants are composite and ready for installation.

• Wingspan: 117.7" (3m)
• Length: 106.3" (2.7m)
• Flying Weight: 36 lbs
• Engine: 150-170cc
• Required: 9 channel radio & 12 servos