The Lynx 130 SE Turbine Engine, 29 lbs Thrust, by Jet Central

The Jet Central turbines are in its own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.

• "SE" Smart Electronics ECU System
• Metallic robust HDT
• Safety acceleration flameout prevention
• Self-adjusting features
• Easy fine tuning, do more with less adjustment
• Simple, graphic navigation menus
• Keep track of your telemetry with an easy to use interface
• One-click altitude compensations
• All the information you need in an easy to read display
• Kerosene Start
• Engine ready for installation, with the newest in ECU's.
• All motors tested at over 6000 ft.

WHAT'S IN THE BOX: Turbine Engine with integrated ECU, Hard Case, SE POWERPACK Unit, Clear Fuel Line 4mm, Clear Kerosene Start Line 3mm, Clear Fuel Line 6mm, ECU Battery, Accessory Box (On/Off Manual Festo Valve (6mm.), Hanger 9 Fuel Filter, S-Bus / Power Cable, USB Flash with Manuals, SE Hand Data Terminal (HDT), JR Style Receiver throttle cable)

• Thrust: 130 Newtons (29.22 lbs) @ 130,000 RPM
• Idle Thrust: 4.2 Newtons (0.94 lbs) @ 35,000 RPM
• RPM Range: 35,000 – 130,000
• Weight: 1.29 kg (2.84 lbs)
• Diameter: 99 mm (3.9 in)
• Length: 229 mm (9.02 in)
• Exhaust Gas Temperature: 500º C – 700º C
• Fuel Consumption: 365.5 g/min (0.43 lt/min) (15.13 oz/min) @ 130,000 RPM