The Hornet 85 SE Turbine Engine, 19 lbs Thrust, by Jet Central

Jet Central Turbine Maintenance Cycle: 25 Hours; $250 Overhaul Fee + $60 Freight

• JetCentral "SE" Smart Electronics ECU System
• Metallic robust HDT
• Safety acceleration flameout prevention
• Self-adjusting features
• Easy fine tuning, do more with less adjustment
• Simple, graphic navigation menus
• Keep track of your telemetry with an easy to use interface
• One-click altitude compensations
• All the information you need in an easy to read display
• Kerosene Start
• Engine ready for installation, with the newest in ECU's.
• All motors tested at over 6000 ft.

The JETCENTRAL TURBINE ENGINES are in there own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.

WHAT'S IN THE BOX: Turbine Engine with integrated ECU, Hard Case, SE POWERPACK Unit, Clear Fuel Line 4mm, Clear Kerosene Start Line 3mm, Clear Fuel Line 6mm, ECU Battery, Accessory Box, On/Off Manual Festo Valve (6mm.), Hanger 9 Fuel Filter, S-Bus / Power Cable, USB Flash with Manuals, SE Hand Data Terminal (HDT), JR Style Receiver throttle cable

• Thrust: 8.67 kg (19 lbs) @ 182,000 RPM
• Idle Thrust: 0.38 kg (0.8 lbs)
• RPM Range: 55,000 – 182,000
• Weight: 0.820 kg (1.81 lbs) with starter
• Diameter: 82 mm (3.228 in)
• Length: 205 mm (8.07 in) with starter
• Exhaust Gas Temperature: 500º C – 700º C (932ª F – 1292ª F)
• Fuel Consumption: 0.338 lt/min (11.90 oz/min)
• Maintenance Cycle: 25 hours