The Cheetah 160 SE Turbine Engine, 36 lbs Thrust, by Jet Central

The Cheetah is the Smallest 160N Turbine in the World. 140 Size with 160 Power!

Click Here to Download the Instruction Manual
Jet Central Turbine Maintenance Cycle: 25 Hours; $250 Overhaul Fee + $60 Freight

NEW! Jet Central "SE" Smart Electronics ECU System

• Metallic robust HDT
• Safety acceleration flameout prevention
• Self-adjusting features
• Easy fine tuning, do more with less adjustment
• Simple, graphic navigation menus
• Keep track of your telemetry with an easy to use interface
• One-click altitude compensations
• All the information you need in an easy to read display

The JET CENTRAL TURBINES ENGINES are in its own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.

• Kerosene Start
• Engine ready for installation, with the newest in ECU's.
• All motors tested at over 6000 ft.
• Lifetime Warranty

Cheetah Turbine Complete Set with Auto Start includes

• Turbine Engine with integrated ECU
• Hard Case
• SE POWERPACK Unit
• Clear Fuel Line 4mm
• Clear Kerosene Start Line 3mm
• Clear Fuel Line 6mm
• 3 Cell LiFePo Battery
• Accessory Box
  • On/Off Manual Festo Valve (6mm.)
  • Hanger 9 Fuel Filter
  • S-Bus / Power Cable
  • USB Flash with Manuals
  • SE Hand Data Terminal (HDT)
  • JR Style Receiver throttle cable

• Thrust: 160 Newtons. 16.33 kg (36 lbs) @ 130,000 RPM
• Idle Thrust: 0.5 kg (1.1 lbs)
• RPM Range: 35,000 – 130,000
• Weight: 1.3 kg (2.866 lbs) with starter
• Diameter: 102.4 mm (4.031 in)
• Length: 249.9 mm (9.838 in) with starter
• Exhaust Gas Temperature: 500º C – 720º C
• 0.6 lt/min (21 oz/min) @ 130,000 RPM