Aircraft / Avionics Orders: 800.447.3408 Radio Control Orders: 877.219.4489
Innovation
Innovative features found in this next generation air band panel mount transceiver are why more pilots trust Icom as the one you add before flight.
White OLED Display and White Key Backlight
The IC-A220 has a bright organic light emitting diode (OLED) display with a wide 170-degree viewing angle. White characters on a black background give the viewer clear, easy to read operating information. The white key backlighting and white OLED display match a modern plane’s instrument panel. In addition, the auto dimmer function adjusts the display for optimum brightness for either day or night.
Easy channel selection
It is fast and easy to select any of the memory channels in the IC-A220. The “flip-flop” arrow button switches between main and stand-by channels. The dual watch function allows you to monitor two channels simultaneously. Additionally, the improved auto stack memory stores the last 20 channels used and allows you to recall those channels easily.
GPS memory function
When connected to an external GPS receiver equipped with an airport frequency database, the frequency data such as nearby airports can be transferred and made available.
12V/24V DC power source
The built-in DC-DC converter accepts a 12/24V (11.5–27.5V) DC power source. The IC-A220 is easily installed in most airplanes or vehicles.
Intercom functions
The IC-A220 has a built-in voice activated intercom function allowing the pilot to talk with the copilot via the headset. The IC-A220 has an adjustable audio level and squelch control functions.
Easy installation
The IC-A220 has a D-Sub 25-pin industry standard connector for easy installation. The slim case can be installed into a tight panel space.
General |
|
Frequency coverage Tx/Rx Rx Wx channels |
118.000–136.992MHz 118.000–136.975MHz 161.650–163.275MHz* (*USA version only.) |
Mode | AM (6K00A3E, 5K60A3E) |
Frequency spacing | 8.33kHz/25kHz |
Frequency stability | ±5ppm |
Operating Temperature | -20°C to +55°C |
Antenna impedeance | 50Ω |
No. of memory channels | 20 regular memory, 50 group memory, 10 GPS, 10 Weather*, 20 auto stack memory (* USA version only) |
Power supply requirement | 13.8V/27.5V DC (Negative ground) |
Dimensions (W×H×D) (projections not included) |
160×34×271 mm; 6.3×1.34×10.67 in |
Weight (approx.) | 1.0 kg; 2.2 lb |
Transmitter |
|
Output power | 8 W typical (carrier power) |
Spurious emission | –60dBc |
Modulation limiting | 70% (Maximum 98%) |
Microphone impedance | 600Ω |
Receiver |
|
Intermediate frequencies |
38.85MHz/450kHz (1st/2nd) |
Sensitivity AM FM |
Less than 2μV Less than 1.4μV |
Selectivity
25kHz spacing 8.33kHz spacing |
±3kHz/±22kHz (6dB/60dB) ±2.778kHz/±7.37kHz (6dB/60dB) |
Spurious rejection | More than 74dBμ |
Audio output power
External SP Headphone |
5W with a 4Ω load 60mW with a 500Ω load |
Measurements made in accordance with RTCA DO-186B for USA version. All stated specifications are and subject to change without notice or obligation.
Standard | MIL 810 G | |
Method | Proc | |
Low Pressure | 500.5 | I, II |
High Temp. | 501.5 | I,II |
Low Temp. | 502.5 | I, II |
Temperature Shock | 503.5 | I-C |
Solar Radiation | 505.5 | I |
Humidity | 507.5 | II |
Vibration | 514.6 | I |
Shock | 516.6 | I |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Supplied Accessories: Mounting bracket kit