E-flite Park 300 Outrunner 1380Kv Brushless Motor

• Ideal for 3D models 6–9 oz (170–255 g) and sport and scale models 8–12 oz (225–340 g)
• High-torque, direct-drive alternative to inrunner brushless motors
• Ideal for models requiring up to 85 watts of power
• Integrated prop saver design
• Mount, prop adapter and hardware included
• External rotor design with 3.2mm shaft
• Low noise level

Needed to Complete: 8A–10A Brushless ESC, 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po, 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer

Specifications

• Type: Brushless outrunner
• Size: 180/280 replacement
• Bearings or Bushings: Two 3.175 x 7.94 x 3.6mm Bearings
• Recommended Prop Range: 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
• Voltage: 7.2–11.1V
• RPM/Volt (Kv): 1380
• Resistance (Ri): .33 ohms
• Idle Current (Io): .40A @ 8V
• Continuous Current: 7A
• Maximum Burst Current: 9A (15 sec)
• Cells: 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
• Speed Control: 8–10A brushless
• Weight: 24 g (.8 oz)
• Overall Diameter: 28mm (1.10 in)
• Shaft Diameter: 3.17mm (1/8 in)
• Overall Length: 22mm (.90 in)

• Type: Brushless outrunner
• Size: 180/280 replacement
• Bearings or Bushings: Two 3.175 x 7.94 x 3.6mm Bearings
• Recommended Prop Range: 6x5 to 8x3.8 (3-cells) or up to 10x3.8 (2-cells) - Slow Flyer
• Voltage: 7.2–11.1V
• RPM/Volt (Kv): 1380
• Resistance (Ri): .33 ohms
• Idle Current (Io): .40A @ 8V
• Continuous Current: 7A
• Maximum Burst Current: 9A (15 sec)
• Cells: 6–8 Ni-Cd/Ni-MH or 2–3S Li-Po
• Speed Control: 8–10A brushless
• Weight: 24 g (.8 oz)
• Overall Diameter: 28mm (1.10 in)
• Shaft Diameter: 3.17mm (1/8 in)
• Overall Length: 22mm (.90 in)