Aircraft / Avionics Orders: 800.447.3408 Radio Control Orders: 877.219.4489
Dynon has switched their source of engine pressure sensors to solid-state Kavlico sensors starting January 2, 2012. Kavlico is a US company that has been making high quality sensors for over 50 years, and is well known in the aviation industry.
Engine sensor kits will include these new solid-state sensors, and we have optimized the sensor ranges to better match engine pressure ranges offering greater resolution and accuracy. (The older sensors and kits are still available if needed.)
These solid-state sensors do require different wiring, with a third wire needed for 5-volt power. The Kavlico Pressure Sensors:
EMSKIT- | |||||||
Item | L4C | L4F | L6C | L6F | RTX | J22 | J33 |
Engine Sensors | |||||||
EGT, Hose Clamp 1.00-1.75”, Jabiru | 4 | 6 | |||||
EGT, Hose Clamp 1.00– 2.25” | 4 | 4 | 6 | 6 | |||
CHT, Bayonet 3/8-24 UNF | 4 | 4 | 6 | 6 | |||
CHT, 12 mm Ring Terminal | 4 | 6 | |||||
MAP , 0-60 In Hg, 1/8” hose) | 1 | 1 | 1 | 1 | 1 | ||
Oil Pressure, 1/8-27 NPT, 0-150 PSI | 1 | 1 | 1 | 1 | |||
Oil Temperature, 5/8-18 UNF | 1 | 1 | 1 | 1 | |||
Fuel Pressure, 1/8-27 NPT, 0-30 PSI, Carbureted | 1 | 1 | 1 | 1 | 1 | ||
Fuel Pressure, 1/8-27 NPT, 0-80 PSI, Fuel Injected | 1 | 1 | |||||
Carb Air Temperature, ¼-28 UNF , -50º to 150º | 1 | 1 | |||||
Amps Shunt, 0 – 60 Amps | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Wiring/Harnesses | |||||||
EGT, 2 cylinder, 6' long | 1 | ||||||
EGT/CHT, 4 cylinder, 6' long harness | 1 | 1 | 1 | ||||
EGT/CHT, 6 cylinder, 6' long harness | 1 | 1 | 1 | ||||
Engine sensor main wire harness | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Notes | A | B | B | ||||
A) Uses CHTs, Oil Temperature, Oil Pressure and RPM sensors supplied with the engine B) Uses Oil Pressure and Oil Temperature sensors supplied with the engine C) OAT Probes are included with SkyView SV-ADAHRS-200/201. They should be ordered separately for D10/D100 Series EFIS and EMS instruments. |