AeroCruze 100 PMA Autopilot, STC for Select Cessna Models & PA-28/32, From Bendix-King

Bendix-King STC Paperwork & Manuals Here

Certified for these aircraft: Cessna 172, Cessna 175, Cessna 177, Cessna 180, Cessna 182, Cessna 185, Piper PA 28, Piper PA 32

Please note: PA-32 models equipped with electric flaps, as well as Cessna 180 and 185 models equipped with a Robertson Stol kit, are not compatible with the current installation. Trutrak/BendixKing is currently working on a solution for future installs.

The AeroCruze 100 is an affordable and flexible digital autopilot system for Cessna 172, 175, 177, and Piper PA 28 aircraft. The AeroCruze100 provides a seamless integration with the AeroVue Touch EFIS as well as a variety of other manufacturers.

• Two Standard Servos
• Built-in Ground Track DG
• Track Select Mode
• GPS Nav Mode
• GPS Steering Mode
• Altitude Hold
• VS Select Mode
• Altitude Pre-select
• Altitude Select
• Vertical GPS Steering Mode
• Control Wheel Steering
• Pitch Trim Annunciation

Powerful and Flexible
Emergency autopilot level button helps to bring the aircraft to a wings-level position. Connects to either hand-held GPS or IFR panel mount GPS systems. When connected to hand-held GPS, follows programmed flight plans. When connected to panel mount GPS, autopilot follows roll steering commands to fly complex flight plans Similar to lane assist in automobiles, the AEP stand-by mode monitors aircraft bank angle. Autopilot corrects the bank angles greater than 45 degrees by automatic roll command.

• 12-28 Volt Variants
• 2” Round: 2.5” H x 2.5” W x 5.5” D
• 3” Round: 3.25” H x 3.25” W x 5.5” D
• Flat Pack: 1.6” H x 4.3” W x 6.1” D